4

5

Make sure that the TCP/IP tab is foremost.

Highlight Manually in the Configure: menu and then enter the static IP address 10.0.0.3 (or any IP address higher than the Bridge’s 10.0.0.2 IP address) and the subnet mask 255.255.255.0.

Click Save and close the Network pane.

Changing the Linux TCP/IP Setting

The instructions for setting up boot-time DHCP vary dramatically by distribution, so you may want to refer to your particular version’s documentation. We have included instructions for RedHat.

Note: If you have other network cards installed, you will need to pick distinct Ethernet identifiers for each (eth0, eth1, eth2, etc.). If you select an identifier other than eth0 for your ADSL modem, use that identifier throughout.

For RedHat

To use a static IP address, edit or create /etc/sysconfig/network-scripts/ifcfg-eth0so that it contains the following lines:

Appendix C: Custom Installation Instructions

23