Industry Canada CS03 Statement

afterwards. In the event such a disconnection is deemed necessary, you will be advised of your right to file a complaint with the FCC.

From time to time, the telephone company may make changes in its facilities, equipment, or operations which could affect the operation of this equipment. If this occurs, the telephone company is required to provide you with advance notice so you can make the modifications necessary to obtain uninterrupted service.

There are no user serviceable components within this equipment. For repair and/or warranty information, visit http://www.zoom.com.

It shall be unlawful for any person within the United States to use a computer or other electronic device to send any message via a telephone facsimile unless such message clearly contains, in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or individual sending the message and the telephone number of the sending machine or of such business, other entity, or individual. The telephone number provided may not be a 900 number or any other number for which charges exceed local or long distance transmission charges. Telephone facsimile machines manufactured on and after December 20, 1992, must clearly mark such identifying information on each transmitted message. Facsimile modem boards manufactured on and after December 13, 1995, must comply with the requirements of this section.

This equipment cannot be used on public coin phone service provided by the telephone company. Connection to Party Line Service is subject to state tariffs. Contact your state public utility commission, public service commission, or corporation commission for more information.

Note: This CS03 statement applies only to the models that require CS03 compliance , models 5800-5804.

NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.

The Ringer Equivalence Number (REN) for this terminal equipment is identified on the bottom label of the equipment. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.

AVIS : Le présent matériel est conforme aux spécifications techniques d’Industrie Canada applicables au matériel terminal. Cette conformité est confirmée par le numéro d'enregistrement. Le sigle IC, placé devant le numéro d'enregistrement, signifie que l’enregistrement s’est effectué conformément à une déclaration de conformité et indique que les spécifications techniques d'Industrie Canada ont été respectées. Il n’implique pas qu’Industrie Canada a approuvé le matériel.

L'indice d'équivalence de la sonnerie (IES) du présent matériel est montré sur l'étiquette inférieure du produit. L'IES assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d'une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme d'indices d'équivalence de la sonnerie de tous les dispositifs n'excède pas 5.

U.S. FCC Part 15 Emissions Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

5804, 5803, 5805, 5808, 5809 specifications

Zoom 5804, 5809, 5803, 5808, and 5805 are a series of innovative video conferencing devices from Zoom Video Communications designed for varying needs within modern workplaces. These devices facilitate seamless virtual communication, providing businesses with the technology to enhance collaboration, improve productivity, and foster connectivity among remote teams and clients.

The Zoom 5804 stands out for its compact design and flexibility. This model typically features a high-definition camera, superior microphone technology, and integrated speakers, providing crystal-clear audio and video quality. It is particularly suitable for small to medium-sized conference rooms, ensuring that all participants can engage with ease. The device is also equipped with smart framing technology, which automatically adjusts the camera view to include all participants in the room.

In contrast, the Zoom 5809 is tailored for larger meeting spaces. With enhanced audio and video capabilities, it supports higher participant capacities and delivers a wider angle of coverage. This model often includes advanced features like speaker tracking, allowing the camera to focus on whoever is speaking, ensuring that remote participants feel involved in the discussion.

The Zoom 5803 is designed for versatility and mobility, making it ideal for huddle spaces or smaller teams needing quick access to video conferencing capabilities. It boasts a user-friendly interface, easily connecting to laptops and mobile devices, which allows instant collaboration without the need for extensive technical setup.

For organizations that require higher-end functionality, the Zoom 5808 offers a premium experience with superior picture quality, advanced noise cancellation, and robust integration with other Zoom products. It supports 360-degree audio and video capabilities, making it perfect for larger events or organizations that frequently host webinars and large meetings.

Lastly, the Zoom 5805 combines the best features of its predecessors while also incorporating cutting-edge technology for an enhanced user experience. This model often includes smart analytics tools, helping organizations assess the effectiveness of their meetings and improve future engagements.

Across all models, the Zoom 5800 series embodies the company’s dedication to delivering reliable, high-performance video conferencing solutions that meet the diverse needs of today’s dynamic workforce. Whether opting for a compact model or a feature-rich solution, together they demonstrate Zoom’s commitment to enhancing digital collaboration in any professional environment.

Zoom 5809, 5804, 5808, 5803, 5805 Industry Canada CS03 Statement, FCC Part 15 Emissions Statement

Models: 5804 5803 5805 5808 5809