13
Using the Z-Pedal
Z-PEDAL
• TheupanddowndirectioncanbeusedtoturnaneffectON/OFFwiththepedalswitch.
HINT

To choose the pedal direction to be set

•Press to choose the pedal direction.
Up and down Left Right
21 3 21 3 21 3 21 3
21 3 21 3 21 3 21 3
21 3 21 3 21 3 21 3
21 3 21 3 21 3 21 3
•Theeffectparametersthatcanbeassignedareshown.
•Turn to set the minimum value.
•Turn to set the maximum value.
• Theminimumvaluecanbeset higherthanthemaximumvalue.
When set this way, pushing the pedal down decreases the effect,
while letting it up increases the effect.
HINT
• INPUTVOL:Controlstheinputlevel.
• OUTPUTVOL:Controlstheoutputlevel.(Doesnotaffectthevolume
of the rhythm or looper).
• NOASSIGN:Nofunctionisassignedtothecurrentdirection.
HINT

To select the controlled parameter

Set the parameter range that the pedal can adjust.

•Turn .
21 3 21 3 21 3 21 3
NOTE
• See“Effecttypesandparameters”fordet ailsaboutthefunctions
that can be assigned for each effect.