ZOOM H2

10
To monitor the output of the H2 using a stereo
system, connect a Y cable to the [PHONES/LINE
OUT] jack (stereo mini phone jack) and adjust the
volume with the VOLUME [+]/[-] keys.
To use an external microphone,
connect the mic to the [EXT MIC IN]
jack (stereo mini phone jack). Plug-in
power type microphones are also
supported (p.80).
To record the output signal of
a CD player or similar,
connect it to the [LINE IN] jack
(stereo mini phone jack).
When the H2 is connected to a computer via
the [USB] port (mini USB), it can be used as
audio interface for the computer, and audio
files stored on the SD card in the H2 can be
transferred to the computer.
To monitor the output of the H2
using headphones, connect the
phones to the [PHONES/LINE
OUT] jack (stereo mini phone jack)
and adjust the volume with the
V
OLUME [+]/[-] keys.
To operate the H2 on AC power, be sure to
use only the supplied AC adapter. Using a
different adapter can lead to damage.

H2 Left side

panel H2 Right side

panel

Monitor system

Stereo mic

Plug-in power

type stereo mic

CD player

Computer

Headphones

AC adapter

Getting Connected

Make connections to other equipment such as microphones and audio components as shown below.

NOTE

•To use the built-in mics, disconnect any equipment from the [EXT MIC IN]
jack or [LINE IN] jack. If anything is connected to these jacks, the built-in
mics are deactivated.
• If equipment is connected both to the [EXT MIC IN] jack and [LINE IN]
jack, the [LINE IN] jack has priority.
H2-E.fm 10 ページ 2007年7月11日 水曜日 午後3時19分