ZOOM H2
88
Troubleshooting
If there are problems during operation of the H2, check the following points first.
Problems during recording/
playback
■
No sound, or sound is very weak.
•Check the connections to your monitor
system, and the volume setting of the
system.
•Check whether the volume setting of the H2
is low.
■
Cannot hear recorded sound, or
sound is very weak.
•When using the built-in mics, check
whether the selected mic pattern and the
mic orientation are suitable (
→
p. 21).
•Check the setting of the [MIC GAIN]
switch (
→
p. 15).
•Check whether the recording level setting is
appropriate (
→
p. 16).
•If a CD player or similar device is
connected to the [LINE IN] jack, try
increasing the output level setting of the
device.
■
Cannot use built-in mics/external
mic, cannot select mic pattern.
•If anything is connected to the [EXT MIC
IN] jack or [LINE IN] jack, the built-in
mics do not operate and the mic pattern
cannot be selected. Disconnect all other
equipment.
•If something is connected to the [LINE IN]
jack, the [EXT MIC IN] jack is disabled.
■
Cannot record.
•Verify that an SD card is inserted in the card
slot.
•If the indication "Key Hold" is shown on
the display, the key hold function is active.
Disable the key hold function (
→
p. 84).
■
Level balance of material recorded
in 4-channel mode is strange.
•Check the 3D panning settings and reset
them if necessary (
→
p. 32).
Other problems
■
Unit is not recognized although
[USB] port is connected to
computer.
•Check whether operating system of
computer is supported (
→
p. 71).
•To make the computer recognize the H2,
the connection must be initiated from the
H2 (
→
p. 71).
H2-E.fm 88 ページ ２００７年７月１１日 水曜日 午後３時１９分