Zoom MAC quick start Installing the Faxmodem

Chapter 1 Installing the Faxmodem

Your computer should be located near a telephone jack.

CAUTION

Before you start, touch a grounded metal surface other than your computer to discharge static electricity. Static electricity can damage computer and modem components.

1	Locate your faxmodem’s serial number on the bot-
	tom of the case. Write the number in the Impor-

tant Information section on page 32.

2

3

Turn off the computer.

Connect the faxmodem-to-computer cable. Plug one end of the cable into the wide connector on the back of the faxmodem. Plug the other end into the serial port in the back of your computer.

4	Connect the telephone cord. Plug one end of the
	cord into the PHONE LINE jack on the back of the
	faxmodem. Plug the other end into the telephone
	line connection (typically mounted on a wall), just
	as you would a standard telephone.
5	Connect the power adapter. Plug one end of the
	power adapter into the back of the faxmodem. Plug
	the other end into an available electrical outlet. You
	can leave the power adapter plugged in when you
	are not using the faxmodem.
6	Connect telephone, as shown in the following dia-
	gram. The faxmodem works with or without a tele-

phone connected to it. If your faxmodem came with a speaker or earphone and microphone, plug them into the jacks on the back of the faxmodem, as shown in the illustration.

8 Quick Start and Reference Guide