Zoom MRS-4 Send/return effect algorithms and parameters, HALL, HALL, TONE, TONE, ROOM, ROOM, TONE, TONE, TIME, TIME, TIME, RATE, RATE, RATE, RATE, HALL, HALL, ROOM, ROOM

Operation Basic

Send/return effect algorithms and parameters

Algorithm 1 ( HALL 0 – HALL 9 )

This is a stereo effect that adds hall type reverberation. Higher settings produce longer reverb time.

HALL	0
		Parameter ( TONE 0 – TONE 10 )
HALL	9	TONE	0	Adjusts the reverb tone. Higher settings produce stronger
				treble boost. (5 is the flat setting.)
		TONE 10

Algorithm 2 ( ROOM 0 – ROOM 9 )

		This is a stereo effect that adds room type reverberation. Higher settings
ROOM	0	produce longer reverb time.
		Parameter ( TONE 0 – TONE 10 )
ROOM	9	TONE	0	Adjusts the reverb tone. Higher settings produce stronger
				treble boost. (5 is the flat setting.)
		TONE 10

Algorithm 3 ( DOUBLE0 – DOUBLE9 )

This is a mono doubling delay which adds a slightly delayed component to the original sound, giving the sound more body. Higher settings produce more delayed components.

DOBLE 0

	Parameter	( TIME 2 – TIME 50 )
DOBLE 9	TIME 2

Adjusts the delay time in the range from 2 – 50 ms.

TIME 50

Algorithm 4 ( SHORT 0 – SHORT 9 )

This is a mono short delay. Higher settings produce more delayed components.

SHORT 0

	Parameter ( TIME 50 – TIME 250 )
SHORT 9	TIME 50

Adjusts the delay time in the range from 50 – 250 ms.

TIME250

Algorithm 5 ( LONG 0 – LONG 9 )

Algorithm 6	( CHO MN )
		This is a mono chorus effect. A component whose pitch shifts cyclically up
		and down is added to the original sound, resulting in a wavering, expansive
		sound.
CHO MN		Parameter ( RATE 1 – RATE 50 )
		RATE 1
			Adjusts the fluctuation rate. Higher values produce faster
			fluctuation.
		RATE 50

Algorithm 7	( CHO ST )
		This is a stereo chorus effect. The pitch of left and right components are
		shifted upside down, resulting in a unique, expansive sound.
CHO ST		Parameter ( RATE 1 – RATE 50 )
		RATE 1	Adjusts the fluctuation rate. Higher values produce faster
			fluctuation.
		RATE 50

2.Use the [PARAMETER/VALUE] keys to select the algorithm and the setting value.

The up/down [PARAMETER/VALUE] keys change the setting value. When the highest or lowest setting is reached, the unit switches to the next algorithm.

HALL 8 HALL 9 ROOM 0

Pressing the left/right [PARAMETER/VALUE] keys changes directly to the next algorithm.

ROOM 5 DOBLE 0

3. To change the parameter of the currently selected algorithm, press the

Operation Basic

LONG 0

This is a mono long delay. Higher settings produce more delayed components.

[ENTER/YES] key.

While the algorithm is displayed, pressing the [ENTER/YES] key calls up the parameter for

that algorithm.

Parameter ( TIME 25 – TIME 100 )

LONG 9	TIME 25	Adjusts the delay time in the range from 250 ms (setting
		value 25) – 1000 ms (setting value 100).
	TIME100

DOBLE 0 TIME 2

22 ZOOM MRS-4 ZOOM MRS-4 23