Editing] [Track Reference

5.If necessary, specify the track number and V-take number, and

press the [ENTER/YES] key.

Use the left/right [PARAMETER/VALUE] keys to move the flashing section, and use the up/down [PARAMETER/VALUE] keys to change the number. You can also specify a V- take that is currently not selected for the track.

When you press the [ENTER/YES] key, the display changes as follows.

YES NO

6.To execute the erase process, press the [ENTER/YES] key.

While erasing is in progress, the remaining time is shown on the display as a percentage, such as "doinG90". When the copy is complete, the "tr Edit" screen returns.

NOTE

The length of the processing interval depends on setting conditions.

By pressing the [EXIT/NO] key instead of the [ENTER/YES] key, you can return to the display of the preceding step and make changes.

Exchanging the data of entire tracks

You can exchange the recorded data of two specified tracks.

1.While the main screen is shown, press the [TRACK PARAMETER]

key.

The track parameter menu appears.

2.Use the status keys 1 – 4 to select the exchange source track. Then

use the left/right [PARAMETER/ VALUE] keys to call up the screen for selecting the V-take.

The track number and V-take number are shown.

T1-1

3.Press the [ENTER/YES] key.

The display changes as follows.

ERASE

4.Press the right [PARAMETER/ VALUE] key two times to bring up

the indication "CHAnGE" on the display. Then press the [ENTER/ YES] key.

The track number and V-take number to be used as exchange source are shown. (In the initial condition, this is the V-take currently set for the track selected in step 2.)

CHANGE

Exchange source

 

 

 

 

 

Exchange source

track number

 

 

 

 

V-take number

 

 

CH T1-1

5.If necessary, specify the track number and V-take number, and

press the [ENTER/YES] key.

Use the left/right [PARAMETER/VALUE] keys to move the flashing section, and use the up/down [PARAMETER/VALUE] keys to change the number. You can also specify a V- take that is currently not selected for the track.

When you press the [ENTER/YES] key, the exchange destination track number/V-take number are shown.

Exchange destination

 

 

 

Exchange destination

track number

 

 

V-take number

CH T1-1

6.Use the [PARAMETER/VALUE] keys to specify the exchange

destination track and V-take.

7.Press the [ENTER/YES] key.

The display changes as follows.

YES NO

8.To execute the exchange process, press the [ENTER/YES] key.

While exchange is in progress, the remaining time is shown on the display as a percentage, such as "doinG90". When the copy is complete, the V-take selection screen is shown.

By pressing the [EXIT/NO] key instead of the [ENTER/YES] key, you can return to the display of the preceding step and make changes.

Editing] [Track Reference

44

ZOOM MRS-4

ZOOM MRS-4

45