Editing] [Track Reference

COPY

Copy source

 

 

 

Copy source

track number

 

 

V-take number

CP T1-1

5.If necessary, specify the track number and V-take number, and

press the [ENTER/YES] key.

Use the left/right [PARAMETER/VALUE] keys to move the flashing section, and use the up/down [PARAMETER/VALUE] keys to change the number. You can also specify a V- take that is currently not selected for the track.

When you press the [ENTER/YES] key, the copy destination track number and V-take number are shown.

Copy destination

 

 

 

Copy destination

track number

 

 

V-take number

CP T1-1

6.Specify the copy destination track and V-take in the same way as

described in step 5.

7.Press the [ENTER/YES] key.

The display changes as follows.

YES NO

8.To execute the copy, press the [ENTER/YES] key.

While the copy is in progress, the remaining time is shown on the display as a percentage, such as "doinG90". When the copy is complete, the V-take selection screen returns.

NOTE

The length of the processing interval depends on setting conditions.

By pressing the [EXIT/NO] key instead of the [ENTER/YES] key, you can return to the display of the preceding step and make changes.

Erasing a specified segment

This operation erases the recorded data from the specified segment of a track, returning it to a silent (blank) state.

1.While the main screen is shown, press the [SONG/UTILITY/TUNER]

key.

The display will show the song number.

2.Press the right [PARAMETER/ VALUE] key once to bring up the

indication "tr Edit" (track edit) on the display. Then press the [ENTER/YES] key.

The first item of the track edit menu appears.

TR COPY

3.Press the right [PARAMETER/ VALUE] key once to bring up the

indication "tr Ers" (track erase) on the display. Then press the [ENTER/YES] key.

The screen for specifying the track and V- take to erase appears.

TR ERS

Track number

 

 

 

V-take number

 

 

 

 

 

 

 

SRC1-1

4.Use the [PARAMETER/VALUE] keys to specify the track and V-

take to erase.

Use the left/right [PARAMETER/VALUE] keys to move the flashing section, and use the up/down [PARAMETER/VALUE] keys to change the number.

5.Press the [ENTER/YES] key.

A screen will appear that allows you to set a start point for the erase action.

103560

6.Use the [PARAMETER/VALUE] keys to specify the start point for

the segment to be erased.

The start location can be specified in two ways.

For information on how to specify the position, see page 40.

7.When you have specified the start point, press the [ENTER/YES] key.

A screen will appear that allows you to set the end point for the erase action.

105560

8.Specify the end point in the same way as described in step 6.

9.When you have specified the end point, press the [ENTER/YES] key.

The display changes as follows.

YES NO

10.To execute the erase process, press the [ENTER/YES] key.

While erasing is in progress, the remaining time is shown on the display as a percentage, such as "doinG90". When the copy is complete, the "tr Edit" screen returns.

NOTE

The length of the processing interval depends on setting conditions.

By pressing the [EXIT/NO] key instead of the [ENTER/YES] key, you can return to the display of the preceding step and make changes.

Erasing an entire track

This operation erases all recorded data from the specified track/V-take.

1.While the main screen is shown, press the [TRACK PARAMETER]

key.

The track parameter menu appears.

2.Use the status keys 1 – 4 to select the track to be erased. Then use

the left/right [PARAMETER/VALUE] keys to call up the screen for selecting the V-take.

The track number and V-take number are shown.

T1-1

3.Press the [ENTER/YES] key.

The display changes as follows.

ERASE

4.Press the [ENTER/YES] key.

The track number and V-take number to be erased are shown. (In the initial condition, this is the V-take currently set for the track selected in step 2.)

Track number

 

 

 

V-take number

 

 

 

 

 

 

 

ER T1-1

Editing] [Track Reference

42

ZOOM MRS-4

ZOOM MRS-4

43