Buffet Server
IMPORTANT SAFEGUARDS
When using this electrical appliance, safety precautions
should always be observed, including the following: | |
■ | READ ALL OF THE INSTRUCTIONS. |
■ | Close adult supervision must be provided when this |
■ | appliance is used by or near children. |
Using attachments not recommended or sold by | |
■ | Keystone Manufacturing Co., Inc. may cause hazards. |
DO NOT allow the cord to hang over the edge of the | |
■ | counter or touch hot surfaces. |
Place the Deni Buffet Server securely in the center of | |
■ | the counter or work space. |
Do not place near hot gas or electric burner. | |
■ | Do not touch hot surfaces. |
■ | Turn the thermostat to the OFF position before |
■ | plugging in or unplugging. |
To disconnect, remove plug from wall outlet. | |
■ | CAUTION: The surface will remain warm after the unit |
■ | is turned off. |
Always unplug the unit before attempting to move it. | |
| Extreme caution must be used when moving |
■ | appliances containing hot oil or other hot liquids. |
DO NOT operate with a damaged cord. Return the | |
| appliance to Keystone Manufacturing Company Inc. |
■ | for proper service, replacement or repair immediately. |
Always unplug before cleaning and removing parts. | |
■ | Allow to cool before putting on or taking off parts. |
1 ■ | Always clean each part individually. |
■ Do not use outdoors.
■ Do not use the Deni Buffet Server for other than intended use.
■ Do not clean with metal scrubbing pads. Pieces can break off the pad and short circuit the electrical parts, creating the possibility of an electrical shock.
■ To protect against electrical shock, do not immerse plug, cord, or motor base in water or any other liquids.
■ It is recommended that you do not use an extension cord with this unit. However, if one is used, it must have a rating equal to or exceeding the rating of the appliance.
■ DO NOT leave this appliance unattended while in operation.
■ Do not fill trays more than 2/ full.
■3 This unit is for household use only.
■ This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.