Prestige 2002 Series User’s Guide

Table 10 VoIP

LABEL

DESCRIPTION

 

 

SIP Account

You can configure the Prestige to use multiple SIP accounts. Select one to configure

 

its settings on the Prestige.

Active

Select this check box to have the Prestige use this SIP account. Clear the check box

 

to have the Prestige not use this SIP account.

SIP Number

Enter your SIP number in this field (use the number or text that comes before the @

 

symbol in a full SIP URI). You can use up to 127 ASCII characters.

SIP Local Port

Use this field to configure the Prestige’s listening port for SIP. Leave this field set to

 

the default if you were not given a local port number for SIP.

SIP Server

Type the IP address of the SIP server in this field. It doesn’t matter whether the SIP

Address

server is a proxy, redirect or register server.

SIP Server Port

Enter the SIP server’s listening port for SIP in this field. Leave this field set to the

 

default if your VoIP service provider did not give you a server port number for SIP.

REGISTER

Enter the SIP register server’s address in this field.

Server Address

If you were not given a register server address, then enter the address from the

 

SIP Server Address field again here.

REGISTER

Enter the SIP register server’s listening port for SIP in this field.

Server Port

If you were not given a register server port, then enter the port from the SIP

 

Server Port field again here.

SIP Service

Enter the SIP service domain name in this field (the domain name that comes after

Domain

the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended set

 

characters.

Authentication

This is the user name for registering this SIP account with the SIP register server.

User ID

Type the user name exactly as it was given to you. You can use up to 95 ASCII

 

characters.

Authentication

Type the password associated with the user name above. You can use up to 95

Password

ASCII Extended set characters.

Block Caller ID

Select this check box to not show identification information when you make VoIP

 

phone calls. Clear the check box to show identification information when you make

 

VoIP phone calls.

Incoming Call

Phone 1 and Phone 2 correspond to the Prestige’s physical PHONE 1 and 2 ports,

apply to

respectively. Select whether you want to receive calls for this SIP account on Phone

 

1, Phone 2 or both. If you select both, you will not know which SIP account a call is

 

coming in on.

Advanced

Click Settings to open a screen where you can configure the Prestige’s advanced

Settings

VoIP settings like SIP server settings, the RTP port range and the coding type.

Apply

Click Apply to save your changes back to the Prestige.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

6.3 Advanced VoIP Settings Configuration

Click VoIP in the navigation panel, select a SIP account and then click Settings to display the following screen.

48

Chapter 6 VoIP Screens