ZyXEL Communications 202H Plus 5.6 Configuring Source and Destination Addresses

Prestige 202H Plus Quick Start Guide

	Table 3 Creating/Editing A Firewall Rule
LABEL	DESCRIPTION
Destination Address	Click DestAdd to add a new address, DestEdit to edit an existing one or DestDelete to
	delete one. Please see the following section on adding and editing destination addresses.
Services
Available/ Selected	Highlight a service from the Available Services box on the left, then click >> to add it to the
Services	Selected Services box on the right. To remove a service, highlight it in the Selected
	Services box on the right, then click <<.
Edit Available Service	Click this button to go to the list of available services.
Action for Matched	Should packets that match this rule be blocked or forwarded? Make your choice from the
Packets	drop down list box. Note that Block means the firewall silently discards the packet.
Log	This field determines if a log is created for packets that match the rule, don’t match the rule,
	both or no log is created.
Alert	Check the Alert check box to determine that this rule generates an alert when the rule is
	matched.
Delete	Click Delete to remove this rule.

5.6 Configuring Source and Destination Addresses

To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To edit an existing source or destination address, select it from the box and click SrcEdit or DestEdit from the previous screen. Either action displays the following screen.

Figure 7 Adding/Editing Source and Destination Addresses

The following table describes the labels in this screen.

23