Prestige 202H Plus Quick Start Guide
LED | COLOR | STATUS | DESCRIPTION |
|
|
|
|
PWR/SYS | Green | On | The Prestige is receiving power and functioning properly. |
|
|
|
|
|
| Blinking | The Prestige is rebooting. |
|
|
|
|
| Red | On | Power to the Prestige is too low. |
|
|
|
|
|
| Off | The system is not ready or has malfunctioned. |
|
|
|
|
LAN | Green | On | The Prestige has a successful 10Mb Ethernet connection. |
|
|
|
|
|
| Blinking | The Prestige is sending/receiving data. |
|
|
|
|
| Amber | On | The Prestige has a successful 100Mb Ethernet connection. |
|
|
|
|
ISDN LNK | Green | On | The ISDN link is connected to an ISDN switch and ready to send or receive |
|
|
| data. |
|
|
|
|
|
| Off | The ISDN link is not connected to an ISDN switch or has not yet initialized. |
|
|
|
|
ISDN B1, B2 | Green | On | The ISDN B1(B2) line is sending or receiving data. |
|
|
|
|
|
| Off | The ISDN B1(B2) line is not sending or receiving data.. |
|
|
|
|
Phone | Green | On | The telephone(s) connected to this port is (are) in use. |
|
|
|
|
|
| Blinking | The telephone(s) connected to this port is (are) ringing. |
|
|
|
|
|
| Off | The telephone(s) connected to this port is (are) not in use. |
|
|
|
|
3 Setting Up Your Computer’s IP Address
Skip this section if your computer is already set up to accept a dynamic IP address. This is
the default for most new computers.
The Prestige is already set up to assign your computer an IP address. Use this section to set up your computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with your Prestige.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.
5