Prestige 202H Plus Quick Start Guide
2 Hardware Installation
2.1 Rear Panel
LABEL | DESCRIPTION |
|
|
ON/OFF | Turn the router on and off by pushing the power button (in is ON, out is OFF). |
|
|
POWER 12VAC | Connect to a power source using the power adapter for your region (see your User’s Guide). |
|
|
LAN | Connect to computer(s) / external hub(s) using an Ethernet cable. The LAN ports are auto- |
| crossover, which means either a crossover or |
| case. |
|
|
CONSOLE | Connect the male end of the console cable to the console port of the router and the female end to |
| a serial port (COM1, COM2 or other COM port) of your computer. |
|
|
ISDN | Connect the router to the ISDN network using the included ISDN cable. Plug one end of the cable |
| into the port labeled ISDN and the other to the ISDN wall jack. |
PHONE | Connect your analog phone devices to these ports via |
|
|
2.2 The Front Panel LEDs
Turn on the Prestige by pressing the ON/OFF button.
The PWR/SYS LED blinks green while performing a system test and then stays on steady green if the testing is successful. If the router senses a low voltage power supply, the PWR/SYS LED turns on steady red. The LAN, and ISDN LEDs turn on if they are properly connected.
4