ZyXEL Communications 2602HW manual 38

	Prestige 2602HW Series Quick Start Guide
	Table 7 Rule Summary
LABEL	DESCRIPTION
Rule	This is your firewall rule number. The ordering of your rules is
	important as rules are applied in turn.
	Click a rule’s number to go to the Firewall Edit Rule screen to
	configure or edit a firewall rule.
Active	This field displays whether a firewall is turned on (Y) or not (N).
Source IP	This drop-down list box displays the source addresses or ranges of
	addresses to which this firewall rule applies. Please note that a blank
	source or destination address is equivalent to Any.
Destination IP	This drop-down list box displays the destination addresses or ranges
	of addresses to which this firewall rule applies. Please note that a
	blank source or destination address is equivalent to Any.
Service	This drop-down list box displays the services to which this firewall
	rule applies. Please note that a blank service type is equivalent to
	Any. See the User’s Guide for more information.
Action	This is the specified action for that rule, either Block or Forward.
	Note that Block means the firewall silently discards the packet.
Schedule	This field tells you whether a schedule is specified (Yes) or not (No).
Log	This field shows you whether a log is created when packets match
	this rule (Enabled) or not (Disable).
Alert	This field tells you whether this rule generates an alert (Yes) or not
	(No) when the rule is matched.
Insert/Append	Type the index number for where you want to put a rule. For
	example, if you type “6”, your new rule becomes number 6 and the
	previous rule 6 (if there is one) becomes rule 7.
	Click Insert to add a new firewall rule before the specified index
	number.
	Click Append to add a new firewall rule after the specified index
	number.
Move	Type a rule’s index number and the number for where you want to
	put that rule. Click Move to move the rule to the number that you
	typed. The ordering of your rules is important as they are applied in
	order of their numbering.

38