| Prestige 2602HW Series Quick Start Guide |
| Table 1 Rear Panel Description |
|
|
LABEL | DESCRIPTION |
|
|
CONSOLE | Only connect this port if you want to configure the Prestige using the |
| SMT via console port see your User's Guide for details. |
| Use the console port for local device configuration and management. |
| Connect one end of the console cable to the console port of the |
| Prestige and the other end to a serial port (COM1, COM2 or other |
| COM port) on your computer. Your computer should have a terminal |
| emulation communications program (such as HyperTerminal) set to |
| VT100 terminal emulation, no parity, 8 data bits, 1 stop bit, no flow |
| control and 9600 bps port speed. |
|
|
RESET | You only need to use this button if you’ve forgotten the Prestige’s |
| password. It returns the Prestige to the factory defaults (password is |
| 1234, LAN IP address 192.168.1.1 etc.; see your User’s Guide for |
| details). |
|
|
2.3 Prestige 2602HWL
Use both VoIP and regular phone services with the Prestige 2602HWL’s lifeline feature. Make and receive regular phone calls while someone else connected to the Prestige is making VoIP calls.
7