Prestige 2602HW Series Quick Start Guide

The following table describes the labels in this screen.

 

Table 8 Firewall: Edit Rule

 

 

LABEL

DESCRIPTION

 

 

Active

Select this option to enable this firewall rule.

 

 

Action for

Use the radio button to select whether to discard (Block) or allow the

Matched

passage of (Forward) packets that match this rule.

Packet

 

Source/Destination Address

 

 

Address

Do you want your rule to apply to packets with a particular (single) IP, a

Type

range of IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet

 

or any IP address? Select an option from the drop-down list box that

 

includes: Single Address, Range Address, Subnet Address and

 

Any Address.

Start IP

Enter the single IP address or the starting IP address in a range here.

Address

 

 

 

End IP

Enter the ending IP address in a range here.

Address

 

 

 

Subnet Mask

Enter the subnet mask here, if applicable.

 

 

Add

Click Add to add a new address to the Source or Destination

 

Address box. You can add multiple addresses, ranges of addresses,

 

and/or subnets.

 

 

Edit

To edit an existing source or destination address, select it from the box

 

and click Edit.

Delete

Highlight an existing source or destination address from the Source or

 

Destination Address box above and click Delete to remove it.

Services

 

 

 

Available/

Please see User’s Guide for more information on services available.

Selected

Highlight a service from the Available Services box on the left, then

Services

click Add>> to add it to the Selected Services box on the right. To

 

remove a service, highlight it in the Selected Services box on the

 

right, then click Remove.

Available

Click the Available Services link to bring up the screen that you use to

Service

configure a new custom service that is not in the predefined list of

 

services.

 

 

41