ZyWALL 35 Internet Security Appliance

1 Hardware Connections

1.1 Front Panel and Connectors

Refer to section 1.3 on how to setup your ZyWALL.

LABEL

DESCRIPTION

 

 

RESET

You only need to use this button if you’ve forgotten the ZyWALL’s password. It returns

 

the ZyWALL to the factory defaults (password is 1234, LAN IP address 192.168.1.1,

 

terminal emulation settings as described below etc.; see your User’s Guide for details).

 

 

WAN 10/100

These ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-crossover

1/2

(automatically adjust to straight-through or crossover Ethernet cable).

 

 

LAN/DMZ

These ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-crossover

10/100

(automatically adjust to straight-through or crossover Ethernet cable).

1-4

 

 

 

1.2 Rear Panel and Connectors

LABEL

DESCRIPTION

 

 

DIAL BACKUP

Only connect this port if you want to set up a backup WAN connection; see your User’s

 

Guide for details.

CONSOLE

Only connect this port if you want to configure the ZyWALL using the SMT (System

 

Management Terminal) via console port; see your User’s Guide for details.

 

Your computer should have a terminal emulation communications program (such as

 

HyperTerminal) set to VT100 terminal emulation, no parity, 8 data bits, 1 stop bit, no flow

 

control and 9600 bps port speed.

 

 

2