ZyXEL Communications 652H/HW 5.8 Configuring Source and Destination Addresses

	Prestige 652H/HW
	Table 7 Creating/Editing A Firewall Rule
LABEL	DESCRIPTION
Edit Available	Click this button to go to the list of available custom services.
Service
Action for Matched	Should packets that match this rule be blocked or forwarded? Make your choice from the
Packets	drop down list box. Note that Block means the firewall silently discards the packet.
Log	This field determines if a log is created for packets that match the rule, don’t match the
	rule, both or no log is created.
Alert	Check the Alert check box to determine that this rule generates an alert when the rule is
	matched.
Delete	Click Delete to remove this rule.

5.8 Configuring Source and Destination Addresses

To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To edit an existing source or destination address, select it from the box and click SrcEdit or DestEdit from the previous screen. Either action displays the following screen.

Figure 21 Adding/Editing Source and Destination Addresses

The following table describes the fields in this screen.

Table 8 Adding/Editing Source and Destination Addresses

LABEL	DESCRIPTION
Address Type	Do you want your rule to apply to packets with a particular (single) IP address, a range of
	IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP address? Select an
	option from the drop down list box
Start IP Address	Enter the single IP address or the starting IP address in a range here.

25