Prestige 652H/HW

 

Table 10 VPN IKE

 

 

LABEL

DESCRIPTION

 

 

Remote Address

Use the drop-down menu to choose Single, Range, or Subnet. Select Single with a

Type

single IP address. Select Range for a specific range of IP addresses. Select Subnet to

 

specify IP addresses on a network by their subnet mask.

 

 

IP Address Start

When the Address Type field is configured to Single, enter a (static) IP address on the

 

network behind the remote IPSec router. When the Address Type field is configured to

 

Range, enter the beginning (static) IP address, in a range of computers on the network

 

behind the remote IPSec router. When the Address Type field is configured to Subnet,

 

enter a (static) IP address on the network behind the remote IPSec router.

 

 

End / Subnet Mask

When the Address Type field is configured to Single, this field is N/A. When the

 

Address Type field is configured to Range, enter the end (static) IP address, in a

 

range of computers on the network behind the remote IPSec router. When the Address

 

Type field is configured to Subnet, enter a subnet mask on the network behind the

 

remote IPSec router.

Local ID Type

Select IP to identify this Prestige by its IP address.

 

Select DNS to identify this Prestige by a domain name.

 

Select E-mailto identify this Prestige by an e-mail address.

Content

When you select IP in the Local ID Type field, type the IP address of your computer or

 

leave the field blank to have the Prestige automatically use its own IP address.

 

When you select DNS in the Local ID Type field, type a domain name (up to 31

 

characters) by which to identify this Prestige.

 

When you select E-mailin the Local ID Type field, type an e-mail address (up to 31

 

characters) by which to identify this Prestige.

 

The domain name or e-mail address that you use in the Content field is used for

 

identification purposes only and does not need to be a real domain name or e-mail

 

address.

 

 

My IP Address

Enter the WAN IP address of your Prestige. The Prestige uses its current WAN IP

 

address (static or dynamic) in setting up the VPN tunnel if you leave this field as

 

0.0.0.0.

 

The VPN tunnel has to be rebuilt if this IP address changes.

 

 

Peer ID Type

Select IP to identify the remote IPSec router by its IP address.

 

Select DNS to identify the remote IPSec router by a domain name.

 

Select E-mailto identify the remote IPSec router by an e-mail address.

31