Prestige 652H/HW

 

 

Table 9 VPN Summary

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

Remote Address

This is the IP address(es) of computer(s) on the remote network behind the remote

 

 

 

IPSec router.

 

 

 

This field displays N/A when the Secure Gateway IP Address field displays 0.0.0.0. In

 

 

 

this case only the remote IPSec router can initiate the VPN.

 

 

 

The same (static) IP address is displayed twice when the Remote Address Type field

 

 

 

in the Configure-IKE(or Manual) screen is configured to Single Address.

 

 

 

The beginning and ending (static) IP addresses, in a range of computers are displayed

 

 

 

when the Remote Address Type field in the Configure-IKE (or Manual) screen is

 

 

 

configured to Range Address.

 

 

 

A (static) IP address and a subnet mask are displayed when the Remote Address

 

 

 

Type field in the Configure-IKE(or Manual) screen is configured to Subnet Address.

 

 

Encap

This field displays Tunnel or Transport mode (Tunnel is the default selection).

 

 

 

 

 

 

IPSec Algorithm

This field displays the security protocols used for an SA.

 

 

 

Both AH and ESP increase Prestige processing requirements and communications

 

 

 

latency (delay).

 

 

 

 

 

 

Secure Gateway

This is the static WAN IP address or URL of the remote IPSec router. This field displays

 

 

IP

0.0.0.0 when you configure the Secure Gateway IP Address field in the Configure-

 

 

 

IKE screen to 0.0.0.0.

 

5.11 Configuring VPN Policies

Click an IPSec rule’s index number to open the VPN IKE screen where you can configure the IPSec rule.

28