ZyXEL Communications 70 10 Troubleshooting, Apply, Close, Problem, Corrective Action

ENGLISH

4Use this screen to enable anti- spam and select which traffic flows the ZyWALL scans for spam. The recommended traffic flows are already selected. You generally only need to select traffic directions that have incoming e-mail from outside e-mail servers.

5Click Apply.

6 Click Close in the final screen to

complete the anti-spam wizard setup.

7 Congratulations, you have configured the ZyWALL to scan for spam e-mail.

You can also use the anti-spam whitelist and blacklist to identify legitimate e-mail and spam. See the anti- spam chapter in the User’s Guide for details.

10 Troubleshooting

Problem	Corrective Action
None of the LEDs	Make sure that you have the power cord connected to the ZyWALL and plugged in to an
turn on.	appropriate power source. Make sure you have the ZyWALL turned on. Check all cable
	connections.
	If the LEDs still do not turn on, you may have a hardware problem. In this case, you should
	contact your local vendor.

16