ENGLISH

Do the following to make hardware connections for initial setup.

1 Use an Ethernet cable to connect the LAN port to a computer. You can also use Ethernet cables to connect public servers (web, e-mail, FTP, etc.) to the DMZ ports.

2Use another Ethernet cable(s) to connect the WAN 1 and/or WAN 2 port to an Ethernet jack with Internet access.

3Insert the ZyWALL Turbo extension card to use the anti-virus and IDP features or insert a wireless LAN card to use the wireless LAN feature. See the ZyWALL Turbo Card guide for more information about the extension card. See the user’s guide about installing a wireless LAN card.

4Use the included power cord to connect the power socket (on the rear panel) to a power outlet.

5Push the power switch to the on position and look at the front panel. The PWR LED turns on. The SYS LED blinks while performing system testing and then stays on if the testing is successful. The ACT, CARD, LAN, DMZ, and WAN LEDs turn on and stay on if the corresponding connections are properly made.

3