ENGLISH

6 Check the

NetworkStatus table. If the

WAN 1

status is not Down and

there is an IP address, go to Section 5.

If the WAN 1 status is

Down (or there is not an IP address), click the Wizard icon and use

Section 4 to configure WAN 1.

Use the NETWORK WAN screens if you need to configure WAN 2. You can also configure load balancing between the WAN ports.

3 Bridge Mode

When you set the ZyWALL to bridge mode, it functions as a transparent firewall. Do the following to set the ZyWALL to bridge mode.

5