ZyAIR B-3000

Do the following to make hardware connections for initial setup.

1 Using an Ethernet cable, connect the ETHERNET port to a computer for initial configuration.

2Connect the POWER 12VDC socket to a power source using only the included power adaptor for your region.

Note: Connect the ZyAIR ETHERNET port to an Ethernet jack with Internet access after you have completed the initial configuration.

1.1 The LEDs

The PWR and the ZyAIR LEDs turn on when the power is connected. The ETHN LED turns on, if the ETHERNET port is properly connected.

See the ZyAIR Front Panel LED Description table in the User’s Guide for more information.

2 Accessing the Web configurator

Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled.

3