ZyAIR B-3000

4 Align the holes on the back of the ZyAIR with the screws on the wall. Hang the ZyAIR on the screws.

5 Power over Ethernet (PoE)

Power over Ethernet (PoE) is the ability to provide power to your ZyAIR via an 8-pin CAT 5 Ethernet cable, eliminating the need for a nearby power source.

An injector or PoE device (not included) is also needed to supply the Ethernet cable with power. This feature allows increased flexibility in the locating of your ZyAIR.

6 Troubleshooting

Problem

Corrective Action

The PWR LED is off.

Make sure you are using the correct power adaptor and the power adaptor is plugged

 

into an appropriate power supply.

 

Unplug the power adaptor and plug it in again. If the error persists, you may have a

 

hardware problem. In this case, you should contact your vendor.

 

 

10