ZyAIR B-3000

 

 

Problem

Corrective Action

The ETHN LED is off.

Check the cable connection to the ZyAIR ETHERNET port. Make sure your computer’s

 

network card is working properly.

 

 

I cannot access the

Make sure the IP addresses and subnet masks of the ZyAIR and the computer are in

web configurator.

the same IP address range. (For example, if the ZyAIR is using the default IP address

 

and subnet mask, check that the IP address of the computer is in the range 192.168.1.3

 

~192.168.1.254 and the subnet mask is 255.255.255.0). Refer to the Set Up Your

 

Computer’s IP Address section.

 

If you changed the ZyAIR default IP address, then enter the new IP address as the web

 

site address.

 

The default password is “1234”. If you have changed the password and have now

 

forgotten it, you will need to reset the ZyAIR. Refer to the User’s Guide for how to use

 

the RESET button.

 

 

 

Make sure the ZyAIR is connected to the network.

 

Make sure you entered your username correctly. A username may be case-sensitive.

 

 

I cannot ping any

If the ETHN LED is off, check the cables between the ZyAIR and your computer or hub.

computer on the

Verify that the IP address and the subnet mask of the ZyAIR and the computers are in

wireless LAN.

the same range.

 

 

 

6.1 Procedure to View a Product’s Certification(s)

1 Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

11