|
| ZyAIR |
|
| 5 Troubleshooting |
| |
|
| Table 4 Troubleshooting |
|
|
|
|
|
| PROBLEM | CORRECTIVE ACTION |
|
|
|
|
|
| The POWER and/or | Make sure the power cord is connected into an adequate power supply and that the |
|
| ACTIVE LED are | power supply is turned on. |
|
| off on the inline |
|
|
| power injector. |
|
|
|
| Disconnect and Connect the ZyAIR to the power supply. If the error persists, you may |
|
|
| have a hardware problem. In this case, you should contact your vendor. |
|
|
|
|
|
| The ACTIVE LED | Check the cable connection to the ZyAIR special Ethernet port. |
|
| on the inline power | Make sure your computer’s network card is working properly. |
|
| injector is off. |
| |
|
|
| |
|
|
|
|
| I cannot ping any | If all of the inline power injector LEDs are off, check the cables between the ZyAIR |
|
| computer on the | and your computer or hub. |
|
| LAN. |
|
|
|
|
|
|
| I cannot access the | Make sure the ZyAIR is connected to the network. |
|
| Internet. | Make sure you entered your username correctly. A username may be |
|
|
|
| |
|
|
|
|
18