ZyAIR B-5000 Quick Installation Guide

3 Connections

The following section introduces the hardware connections for the ZyAIR.

3.1Outdoor Access Point & Bridge and Inline Power Injector Ports

1.This is the special Ethernet port for connecting the MIL-C-5015 style Ethernet cable.

2.This is the special serial port for connecting the MIL-C-5015 style RS-232 console port cable.

3.This is the grounding port

Figure 3 - ZyAIR Hardware Casing

4.These are the special N-Type connectors for connecting the antenna or an RF cable.

5.The POWER & DATA OUT port on the inline power injector is used for connecting the other end of the MIL-C-5015 style Ethernet cable.

6.The DATA IN port on the inline power injector is used for connecting the Ethernet cable to a hub, switch, router or a computer.

5