ZyAIR B-5000 Quick Installation Guide

ACTIVE POWER

Figure 8 - Inline Power Injector Front Panel

3.5 Making the Connections

Before installing your Outdoor Access Point & Bridge system in a hard-to-reach location, we recommend that you configure and test all the devices first.

Follow the quick steps below for installation of the Outdoor Access Point & Bridge:

3.5.1 Procedure for Making the Connections

Step 1. With the unit turned off, attach the dipole antenna to the antenna connector as shown

in Figure 9.

Do not over-tighten the antennas. Position the antenna vertically for the best

omni-directional signal reception.

8