ZyXEL Communications G-220 4.4The MAC Filter Screen, MAC Filter

ZyAIR G-220 User’s Guide

		Table 4-2 Access Point Mode: Configuration
LABEL		DESCRIPTION
Key x	Select this option if you want to manually enter the WEP keys.
(where x is a	Enter the WEP key in the field provided.
number
	If you select 64 Bits in the WEP field.
between 1 and
		Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
4)
		example, 11AA22BB33) for HEX key type
	or
		Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
		(for example, MyKey) for ASCII key type.
	If you select 128 Bits in the WEP field,
		Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
		example, 00112233445566778899AABBCC) for HEX key type
	or
		Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
		(for example, MyKey12345678) for ASCII key type.
	If you select 256 Bits in the WEP field,
		Enter either 58 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
		example,
		0000111122223333444455556666777788889999AAAABBBBCCCC000011)
		for HEX key type
	or
		Enter 29 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
		(for example, MyKey111122223333444455556678) for ASCII key type.
		The values for the WEP keys must be set up exactly the same on
		all wireless devices in the same wireless LAN.
		ASCII WEP keys are case sensitive.
Save	Click Save to save changes.
Cancel	Click Cancel to discard changes.

4.4The MAC Filter Screen

The MAC Filter screen allows you to configure the ZyAIR to give exclusive access to (Accept) devices or exclude devices from (Reject) connecting to the ZyAIR. Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of

4-6 Access Point Mode Configuration