ZyAIR G-220 User’s Guide

Step 1. Click Start, Programs, ZyAIR G-220 Utility, Uninstall ZyAIR G-220 Utility. Step 2. Click OK to continue.

Step 3. When prompted, click OK to remove the driver and the utility software.

Figure 5-2 Confirm Uninstall

Step 4. Restart your computer if prompted. Click Finish to complete uninstalling the software.

5.3Upgrading the ZyXEL Utility

Before you uninstall the ZyXEL Utility, take note of the current networkconfiguration.

To perform the upgrade, follow the steps below.

Step 1. Download the latest version of the utility from the ZyXEL web site and save the file on your computer.

Step 2. Follow the steps in Section 5.2 to remove the current ZyXEL Utility from your computer. Step 3. Restart your computer when prompted.

Step 4. After restarting, refer to the procedure in the Quick Installation Guide to install the new utility.

Step 5. Check the version numbers in the About screen to make sure the new utility is installed properly.

5-2

Maintenance