Click Start, Settings, Network and Dial-up Connections (or click Start, Settings, Control Panel and double-clickNetwork and Dial-up Connections).
Refer to Section 1.6.1 to set the ZyAIR to operate in AP mode.

ZyAIR G-220 User’s Guide

Appendix C Access Point Mode Setup Example

This example uses the network sharing feature in Windows 2000 to bridge the wired and wireless network when you set the ZyAIR in access point (AP) mode.

Refer to Section 4.1.1 for setup methods and requirements.

Steps may vary depending on your Windows version. You may need to install additional software in Windows 98/Me.

Configuring the Computer on Which You Install the ZyAIR

Step 1.

Step 2.

Diagram 1 Windows 2000: Start

Step 3. Right-click on the icon for your wired Ethernet adapter and click Properties.

Access Point Mode Setup Example

xv