ZyXEL G-302 v3 User’s Guide

Table 6

Security Settings: WEP (continued)

 

 

 

LABEL

 

DESCRIPTION

 

 

 

Next

 

Click Next to confirm your selections and advance to the Confirm Save screen.

 

 

Refer to Section 3.2.3 on page 38.

Exit

 

Click Exit to return to the Site Survey screen without saving.

 

 

 

3.2.2.2 WPA/WPA2

Note: You can use WPA and WPA2 with the G-302 v3 only in Microsoft Windows XP or Windows 2000.

Figure 16 Security Settings: WPA/WPA2

The following table describes the labels in this screen.

Table 7 Security Settings: WPA/WPA2

LABEL

DESCRIPTION

 

 

Encryption Type

The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are

 

the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses

 

a simple common password, instead of user-specific credentials.

 

Select the encryption type (TKIP or AES) for data encryption.

 

Refer to Section 2.2.3 on page 27 for more information.

 

 

Authentication

Select an authentication method from the drop down list. Options are TLS, TTLS

Type

and PEAP.

Login Name

Enter a user name.

 

This is the user name that you or an administrator set up on a RADIUS server.

 

 

Password

This field is not available when you select TLS in the Authentication Type field.

 

Enter the password associated with the user name above.

 

 

Certification

This field is only available when you select TLS in the Authentication Type field.

 

Select a certificate used by the authentication server to authenticate the G-302 v3.

 

Note: You must first have a wired connection to a network and

 

obtain the certificate(s) from a certificate authority (CA).

Validate Server

Select the check box to check the certificate of the authentication server.

Certificate

 

36

Chapter 3 ZyXEL Utility Configuration