ZyXEL G-302 v3 User’s Guide

The following table describes the labels in this screen.

Table 12 Profile: Wireless Setting: Select a Channel

LABEL

DESCRIPTION

 

 

Wireless Setting

 

 

 

Ad-Hoc Channel

Select a channel number from the drop-down list box. To associate to an ad-hoc

 

network, you must use the same channel as the peer computer.

Back

Click Back to return to the Add New Profile screen.

 

 

Next

Click Next to confirm your selection and advance to the Encryption Type screen.

 

 

Exit

Click Exit to discard changes and return to the Add New Profile screen.

 

 

3If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2, WPA-PSKor WPA2-PSKfrom the drop-down list box to enable data encryption. If you select Ad-Hocnetwork type in the first screen, you can only use WEP encryption method. Otherwise, select DISABLE to allow the G-302 v3 to communicate with the access points or other peer wireless computers without any data encryption and skip to step 6.

Figure 22 Profile: Security Setting: Encryption Type

4The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the G-302 v3. Refer to Section 3.2.2 on page 34 for detailed information on wireless security configuration.

42

Chapter 3 ZyXEL Utility Configuration