ZyXEL Communications G-302 Next, Ad-Hoc, Infrastructure

ZyXEL G-302 v3 User’s Guide

Table 11 Profile: Add New Profile (continued)

LABEL	DESCRIPTION
Network Type	Select the Infrastructure radio button to associate to an AP. Select the Ad-Hoc
	radio button to associate to a peer computer.
Next	Click Next to go to the next screen.
Exit	Click Exit to go back to the previous screen without saving.
Scan Info	This table displays the information of the available wireless networks within the
	transmission range.
	denotes that the wireless device is in infrastructure mode and the wireless
,	security is activated.
	denotes that the wireless device is in infrastructure mode but the wireless
,
	security is deactivated.
or	denotes that the wireless device is in Ad-Hoc mode and the wireless
	security is activated.
	denotes that the wireless device is in Ad-Hoc mode but the wireless security
	is deactivated.
SSID	This field displays the SSID (Service Set IDentifier) of each wireless device.
Scan	Click Scan to search for available wireless devices within transmission range.
Select	Select an available wireless device in the table and click Select to add it to this
	profile.
	Whenever you activate this profile, the G-302 v3 associates to the selected
	wireless network only.

2If you select the Infrastructure network type in the previous screen, skip to step 3. If you select the Ad-Hocnetwork type in the previous screen, a screen displays as follows. Select a channel number and click Next to continue.

Figure 21 Profile: Wireless Setting: Select a Channel

Chapter 3 ZyXEL Utility Configuration 41