ZyXEL Communications G-302 3.2.2.3 WPA-PSK/WPA2-PSK

	ZyXEL G-302 v3 User’s Guide
Table 7 Security Settings: WPA/WPA2
LABEL	DESCRIPTION
PEAP Inner EAP	This field is only available when you select PEAP in the Authentication Type
	field.
	Select a PEAP protocol. Options are TLS and MS CHAP-V2.
TTLS Inner	This field is only available when you select TTLS in the Authentication Type field.
authentication	Select a TTLS protocol that the RADIUS server uses. Options are CHAP, MS
	CHAP, MS CHAP-V2 and PAP.
Back	Click Back to go to the Site Survey screen to select and connect to other network.
Next	Click Next to confirm your selections and advance to the Confirm Save screen.
	Refer to Section 3.2.3 on page 38.
Exit	Click Exit to return to the Site Survey screen without saving.

3.2.2.3 WPA-PSK/WPA2-PSK

Note: You can use WPA and WPA2 with the G-302 v3 only in Microsoft Windows XP or Windows 2000.

Figure 17 Security Settings: WPA-PSK/WPA2-PSK

The following table describes the labels in this screen.

Table 8 Security Settings: WPA-PSK/WPA2-PSK

LABEL	DESCRIPTION
Encryption Type	The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
	the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
	a simple common password, instead of user-specific credentials.
	Select the encryption type (TKIP or AES) for data encryption.
	Refer to Section 2.2.3 on page 27 for more information.
Pre-Shared Key	Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
	sensitive ASCII characters (including spaces and symbols).
Back	Click Back to go to the Site Survey screen to select and connect to other network.
Next	Click Next to confirm your selections and advance to the Confirm Save screen.
	Refer to Section 3.2.3 on page 38.
Exit	Click Exit to return to the Site Survey screen without saving.

Chapter 3 ZyXEL Utility Configuration 37