2.4 LED Status Indicator
The LED status indicator consists of one red and one blue LED. Depending on the camera’s status, the LEDs will appear as follows:
Red IR LEDs (Left), Blue Status LED (Right)
When the IP camera is turned on, the LEDs will light in the following patterns:
Red LEDs | Blue LED | Indication |
On | On | System booting |
Off | On | Successfully established network connection |
On | Off | Performing hardware test |
Off | Off | Powered off |
Blinking (Every | Off | Failed to connect to network/Failed to establish |
0.5 seconds) |
| WPS connection |
Off | Blinking (Every | Attempting to establish a WPS connection |
| 0.5 seconds) |
|
Off | Blinking (Every | Successfully established a WPS connection |
| 0.2 seconds) |
|
Blinking | Blinking | Attempting to establish a network connection |
