ZyXEL Communications manual Installation, Connecting your IPC-3605N

3 Installation

3.1 Connecting your IPC-3605N

The picture below illustrates the basic connection of your IPC-3605N camera:

The following table describes the numbered items:

Number Contents

Ethernet cable from PC to hub/router.

Ethernet cable from router to camera. Use the bundled Ethernet cable to connect the LAN port of the IP camera to the LAN port of your hub/router. Wireless adapter (optional). If you’re using the USB Wi-Fi adapter, plug it into the USB port on your camera for wireless reception.

Power: Attach the power adapter to the camera’s power port, and connect the plug to a power outlet.

Important!

∙The Camera’s USB port only supports the bundled ZyXEL Wireless adapter.

∙After unplugging the camera’s power cable, wait at least 4 seconds before restoring power to the camera.