ENGLISH

Install Hard Drive

Once you intall a hard drive on the NSA210 and create a volume, all existing data on the disk will be erased.

The NSA210 must be turned off before you remove or install hard drive.

Creating a volume formats the hard drive. All data will be lost. Back up any files on the disk to another location before you install the disk in the NSA210.

1.Make sure the power and Ethernet cords are disconnected from the NSA210.

2.Place the NSA210 on a flat surface with the bottom panel facing up. This exposes the bottom panel where the thumbscrew is located. Loosen the thumbscrew using a flat head screwdriver or a coin.

3. Bring the NSA210 to an upright position and take off the front lid to open the hard disk tray as shown in the following:

5