ZyXEL Communications NSA210 manual 9

ENGLISH

1.In the following screen, check the Status of your NSA210. If it shows Up, you can start using your NSA210. If it shows Uninitialized, click the Config icon to start initialization.

2.Input your settings in the Network Configuration screen.

•Select DHCP if you have a network device (such as a router or cable modem) that assigns IP addresses to clients. This automatically selects Dynamic DNS.

•Select Static IP if the clients in your network have specific address assignments. This automatically selects Static DNS. Enter the details in corresponding fields (IP Address, IP Subnet Mask, Gateway Address, Primary DNS and Secondary DNS.) You can also click Copy from NSU to have the NAS Starter Utility detect and fill in these values.

9