ENGLISH

3.Press the power button on the front of the NSA210 to turn it on. Look at the front panel lights.

If no lights turn on, make sure the power cord is not loose and that the power source is turned on.

•The power button light turns steady blue.

•The SYS light turns steady green after a successful startup (it takes about 50 seconds).

•The HDD lights come on if the NSA210 detects hard drives in the disk bays.

•The rear panel LAN port has a light that turns on if the Ethernet port is properly connected to your network. It blinks while sending or receiving traffic.

To turn off the NSA210, press the power button in and hold it until you hear a beep. Then release the button.

Access the NSA210

Use the NAS Starter Utility to access the NSA210. Follow these steps:

1.Insert the included CD into your CD-ROM drive. Click Setup in the screen that displays. Then click the NAS Starter Utility link.

If this screen does not display, use Windows Explorer (My

Computer) to go to the CD-ROM. Double-click setup.exe.

7