P-2302R-P1 Series Quick Start Guide

3.2 Connection Wizard

If you subscribe to a Roadrunner service, you cannot use the Connection Wizard to set up your Internet connection. In this case, please see the User’s Guide for instructions.

Note: You must have Internet access before you can complete this section.

1 In the Wizard Setup screen, click Connection

2 Click Next.

Wizard.

 

 

 

 

 

 

 

 

 

 

 

 

3System Name is used to identify the P-2302R-P1 in the network. Use the default value, unless you know the name is already used in the network.

Domain Name (optional): Enter the appropriate name, if there is one, or use the default value. Click Next.

4This screen has different fields, depending on the connection type (encapsulation) your ISP uses. Select Ethernet or PPP over Ethernet (PPPoE). If you are not sure and if your ISP gave you a user name and password, select PPP over Ethernet. Then, follow the instructions in the appropriate section below.

5