P-2302R-P1 Series Quick Start Guide
3.5 Regular Phone Line Configuration (P-2302RL-P1 only)
When one of your VoIP accounts is registered, the P-2302R-P1 normally uses the Internet (not the regular phone line) to make phone calls. Follow the directions in this section to make sure you can also use the regular phone line while one of your VoIP accounts is registered.
In the main screen, click VoIP > PSTN Line.
PSTN Line Pre-fix Number: If you want to make a regular phone call while one of your VoIP accounts is registered, you have to dial this number before you dial the phone number.
Relay to PSTN Line: Enter phone numbers for regular phone calls (that do not use the Internet) that you always want to dial without the prefix number. For example, enter emergency phone numbers here.
Click Apply.
3.6 Bridge Mode
The P-2302R-P1 supports two modes, Router and Bridge. Usually, you should use Router mode because it supports all the features available in the P-2302R-P1. However, you might use Bridge mode in the following situation:
•There is another router or gateway in the network; and
•You only want to use the P-2302R-P1 for VoIP and Internet access. You do not want to use other features, such as the firewall, even with their default settings.
If you want to use Bridge mode, follow these steps.