2.3.2 Internet Access Setup
1 Configure the Internet access settings in this step. The wizard screens vary depending on the Mode and Encapsulation you chose in the first wizard screen.
Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen. If not given, leave the fields set to the default.
RFC 1483
A)Select Routing if your ISP gave you an IP address and allows multiple computers to share an Internet account. Otherwise, select Bridge. Then select RFC 1483.
B)Click Next.
C)If you selected Routing, enter the IP address given by your ISP.
D)If you selected Routing, select SUA Only when you have one public IP address, Full Feature when you have more than one public IP address (for translation) or None to disable NAT.
E)Click Next.
A |
|
| C |
B | D |
| E |
ENET ENCAP
A)Select Routing, then ENET ENCAP.
B)Click Next.
C)If your ISP gave you an IP address, subnet mask and gateway address, select Static IP Address and enter them. Otherwise, select
Obtain an IP Address Automatically.
D)Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT.
E)Click Next.
A |
C |
B |
D
E
5
