ZyXEL Communications P-660R-T1 v2 Configuration Genie, Zero Configuration, Information From Isp

P-660R-TxC Series Quick Start Guide

Note: Configuration genie and Zero configuration are only able to configure the device automatically for Internet access if you are using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address from your ISP.

If you’re not using these Internet access settings, then use the Web Configurator Internet Access Wizard to manually configure the device.

You will need your Internet access information such as user name and password if given by your ISP.

INFORMATION FROM ISP	YOU ARE USING
	ENCAPSULATION METHOD	MODE	IP ADDRESS
None	RFC1483	Bridge	N/A
	ENET ENCAP	Routing	Dynamic
An IP address only	RFC1483	Routing	Static
A user name and password	PPPoA or PPPoE	Routing	Dynamic
	PPPoA	Bridge	N/A
A user name, password and an IP address	PPPoA or PPPoE	Routing	Static
An IP address, subnet mask and a gateway IP	ENET ENCAP	Routing	Static
address

2.1 Configuration Genie

From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the installation tutorial or from “Multimedia Auto Provisioner” in the CD.

2.2 Zero Configuration

Launch your web browser and navigate to any web site (for example, www.zyxel.com). The P-660R-TxC automatically detects and configures your Internet connection. This may take about two minutes.

If you have a PPPoE or PPPoA connection, a screen displays prompting you to enter your Internet account information. Enter the username, password and/or service name exactly as provided. Click Log on to the Internet !.

3