ZyXEL Communications PLA450 1 Initial Hardware Connections, 1.1 Look at the LEDs (lights)

ENGLISH

1 Initial Hardware Connections

1

23

1 Screw the antenna clockwise onto the antenna connector. Make sure it is securely attached. Point the antenna up (perpendicular to the ground).

2Use the yellow (Ethernet) cable to connect the PLA450’s LAN port to the Ethernet port on your computer.

3Use the included power cord to connect the POWER socket to an appropriate power source. This is also your powerline connection.

1.1 Look at the LEDs (lights)

•Power (): Blinks until the device is ready.

•HomePlug (): Turns on when connected to other HomePlug AV device(s).

•LAN (): Turns on if the LAN connection to your computer is OK.

•WLAN (): Turns on if the wireless LAN feature is on.

3