ZyXEL Communications PLA450 3.2 Manually Set up a Wireless Network

ENGLISH

3The WPS LED ( ) on the PLA450 blinks for a few seconds, then shines steadily, indicating your devices are connected.

4To add another WPS enabled device to your wireless network, press the WPS buttons on your PLA450 and your next WPS-enabled device.

Congratulations! When you have finished setting up your wireless network, go to Section 4.1 to set up your powerline network.

3.2 Manually Set up a Wireless Network

If your wireless devices are not WPS-enabled, use your computer to manually set up your wireless network.

3.2.1 Configure Your PLA450 With the Web Configurator

1Click Network > Wireless LAN in the web configurator’s navigation panel.

2 The following screen appears.

•Name: Enter a descriptive name (up to 32 printable English keyboard characters) for your wireless network.

•Security Mode: Select WPA-PSK.

8