ENGLISH

Introduction

The ZyWALL SSL 10 is an SSL VPN gateway that allows you to set up secure remote network and application access without pre-installing client software. This guide shows you how to connect and configure the ZyWALL (SSL10) to allow a remote user (A) to access a web server (WWW) on your local network via an SSL-VPN connection. You may need your Internet access account information.

https://

 

Internet

 

A

SSL10

WWW

Configuration Steps

1 System Requirements

2 Initial Hardware Connection

3 Access the Web Configurator

4 Configure Setup Wizard

5 Create Web Links for Easy Remote Access

6 Test Remote User Connection From the Internet

7 Deploy the ZyWALL in Your Network

1 System Requirements

The following lists the browser and computer system requiremens for remote user login.

•Internet Explorer 5.5 with Microsoft XML (MSXML) service pack installed or 6.0 and above

•Netscape 7.2 and above

•Firefox 1.0 and above

•Mozilla 1.7.3 and above

•Windows 2000 Professional, Windows XP Home/Professional (with service pack 2 and above) or Linux.

•Sun Java Virtual Machine (JVM) installed with a minimum version of 1.4.2_07 for Netscape/Mozilla/Firefox and 1.4.2_02 for Internet Explorer and Linux computers.

•Java enabled in Internet Explorer on Windows computers.

2