ENGLISH

2Create a Web Application and enter a descriptive name in the Service Name field.

3In the Address field, enter the address of the server. For example, http://192.168.1.200.

4Select Web Server in the Server Type field.

5If you use a non-standard port number (for example, 8080 instead of 80), enter it in the Virtual Web Port field.

6Click Ok to save the settings.

7Click SSL in the navigation panel and click the Edit icon to configure the “default” SSL policy you created using

the setup wizard.

8 In the configuration screen that displays, select the name of the SSL application you have just created and click Ok to save the settings.

This applies the application setting to the SSL policy and allows the remote user to access the server over an SSL-VPN connection.

9Make sure the server is configured properly and connected to the local network.

6 Test Remote User Connection From the Internet

Follow the steps below to access the local network as a remote user from the Internet. You must know the WAN IP address of the ZyWALL (get this information in the Status screen).

1 Connect your computer to a network outside your company firewall.

2 Open your web browser and enter the WAN IP address of the ZyWALL as the URL.

3Click OK or Yes if a security screen displays.

7